top of page
Only available for Logged-in member. Please login or register to access this information
Manual for WSLRW-AG | FW5
Normally Stock
Replaced by
Replaced by
Item codes | FW Released Date | Changes Information |
|---|---|---|
WSLRW-AG-01, WSLRW-AG-02S | 28/01/2023 | Default Alarm off. Add Alarm with the Hysteresis value for the alarm 1 and Alarm 2 (default 1 degree). Add battery type (default battery non-rechargeable). Update payload: X100 for all tilt values. Add CYCLIC_FREQ_FACTOR, ALARM_FREQ_FACTOR |
1
QUICK INSTALLATION GUIDE
1.1 Introduction
1.2 Application Notes
1.3 When does device send Uplink messages?
1.4 Default Configuration
1.5 Battery/ Power Supply
1.6 What's in the Package?
1.7 Guide for Quick Test
1.8 Installation
1.9 Payload Document and Configuration Tables
1.10 How to connect device to Back-end/ Network Server/ Coordinator
2
MAINTENANCE
2.1 Troubleshooting
2.2 Maintenance
3
ADVANCED GUIDE
3.1 Principle of Operation
3.2 Configuration
3.3 Calibration/ Validation
4
PRODUCT SPECIFICATIONS
4.1 Specifications
5
WARRANTY & SUPPORT
5.1 Warranty
5.2 Support
bottom of page